zoom_out_map
chevron_left chevron_right

Rj45 Passive Mini Ethernet Tap Network Packet Capture Mod Replica Monitoring Ethernet Communication Throwing Star LAN Tap

Rj45 السلبية البسيطة إيثرنت انقر فوق التقاط حزم الشبكة وزارة الدفاع الاصل رصد الاتصالات إيثرنت النجمة LAN اضغط
17.400 ر.ع (شامل للضريبة) 17.400 ر.ع (بدون الضريبة)
لا توجد ضريبة
check متوفر
>سوف تكسب 174 نقطة شرائية تعادل 0.348 ر.ع. سوف تكسب 174 نقطة شرائية تعادل 0.348 ر.ع. بعد شرائك لهذا المنتج. كل نقطة = 0.002 ر.ع.
حوّل نقاطك إلى قسائم شرائية من حسابي > النقاط الشرائية.

1

 

Ds

 

Rj45 Passive Mini Ethernet Tap Network Packet Capture Mod Replica Monitoring Ethernet Communication Throwing Star LAN Tap

 

1. PCB Size: 4*3.3cm

2. Height around 1.4mm

 

The LAN Tap Pro is a passive Ethernet tap, requiring no power for operation. There are active methods of tapping Ethernet connections (e.g., a mirror port on a switch), but none can beat passive taps for portability. To the target network, the LAN Tap looks just like a section of cable, but the wires in the cable extend to the monitoring ports in addition to connecting one target port to the other.

The monitoring ports (J3 and J4) are receive-only; they connect to the receive data lines on the monitoring station but do not connect to the station’s transmit lines. This makes it impossible for the monitoring station to accidentally transmit data packets onto the target network.
The LAN Tap is designed to monitor 10BASET and 100BASETX networks. It is not possible for an unpowered tap to perform monitoring of 1000BASET (Gigabit Ethernet) networks, so the Throwing Star LAN Tap intentionally degrades the quality of 1000BASET target networks, forcing them to negotiate a lower speed (typically 100BASETX) that can be passively monitored. This is the purpose of the two capacitors (C1 and C2).
Like all passive LAN Taps, this device degrades signal quality to some extent. Except as described above for Gigabit networks, this rarely causes problems on the target network. In situations where very long cables are in use, the signal degradation could reduce network performance. It is a good practice to use cables that are not any longer than necessary.
Usage
Use Ethernet cables to connect the LAN Tap (J1 and J2) in line with a target network to be monitored.
Use Ethernet cables to connect one or both of the monitoring ports (J3 and J4) to ports on one or two monitoring stations. Each port monitors traffic in one direction only.
Use your favorite software (e.g., tcpdump or Wireshark) on the monitoring station(s) to capture network traffic.
 

DS2

quan IMG_2457 IMG_2408 拷贝IMG_2451 拷贝IMG_2456 拷贝IMG_2430 拷贝IMG_2461 拷贝副本IMG_2457 拷贝

10000008628721680
4000353411454
Brand Name
DEBROGLIE
Type
Cable Adapter
Package
Yes
Model Number
rj45
Products Status
Stock

تقييمات العملاء (0)

5 نجوم
0%
0%
4 نجوم
0%
0%
3 نجوم
0%
0%
2 نجمة
0%
0%
1 نجمة
0%
0%
0/5
X

اكتب مراجعتك